An Ensemble Kalman Filter Approach Based on Level Set Parameterization for Acoustic Source Identification Using Multiple Frequency Information

In this paper, a reconstruction problem of the spatial dependent acoustic source from multiple frequency data is discussed. Suppose that the source function is supported on a bounded domain and the piecewise constant intensities of the source are known on the support. We characterize unknown domain by the level set technique. And the level set function can be modeled by a Hamilton-Jacobi system. We use the ensemble Kalman filter approach to analyze the system state. This method can avoid to deal with the nonlinearity directly and reduce the computation complexity. In addition, the algorithm can achieve the stable state quickly with the Hamilton-Jacobi system. From some numerical examples, we show these advantages and verify the feasibility and effectiveness.     

非均匀流体介质内部散射声场重建的逐层计算方法*

入射声波激励下非均匀流体介质内部散射声场的重建方法对超声层析成像具有重要意义。以往采用矩量法求解,但该方法全域离散形成的复数满秩矩阵规模随着分辨率与计算精度的提高而急剧增大,对算力具有很高的要求,一定程度上限制了其在实际中的应用。为克服上述缺陷,本文以逐层离散、逐层计算为核心思想,以声散射基本公式与近场声全息理论为基础,推导出逐层计算非均匀流体介质内部散射声场的理论公式并给出对应的几何离散模型。为验证该方法的可行性,以矩量法为参照,对同样的介质模型进行介质内部声场重构仿真。结果表明,逐层算法不仅可以有效地重建非均匀流体介质内部散射声场,且大幅度减小了求解规模。     

Channel temporal correlation-based optimization method for imperfect underwater acoustic channel state information

The rapid time variations and large channel estimation errors in underwater acoustic (UWA) channels mean that transmitters for adaptive resource allocation quickly become outdated and provide inaccurate channel state information (CSI). This results in poor resource allocation efficiency. To address this issue, this paper proposes an optimization approach for imperfect CSI based on a Gauss–Markov model and the per-subcarrier channel temporal correlation (PSCTC) factor. The proposed scheme is applicable to downlink UWA orthogonal frequency division multiple access systems. The proposed PSCTC factors are measured, and their long-term stability is verified using data recorded in real-world sea tests. Simulation and experimental results show that the optimized CSI effectively mitigates the effects of the temporal variability of UWA channels. It demonstrates that the resource allocation scheme using optimized CSI achieves a higher effective throughput and a lower bit error rate than both imperfect CSI and the CSI predicted by the recursive least-squares (RLS) algorithm.     

General decay of solutions of a wave equation with memory term and acoustic boundary condition

In this paper, the global solvability to the mixed problem involving the wave equation with memory term and acoustic boundary conditions for non‐locally reacting boundary is considered. Moreover, the general decay of the energy functionality is established by the techniques of Messaoudi. Copyright © 2016 John Wiley & Sons, Ltd.     

Surface Acoustic Wave Characterization of Equivalent Young's Moduli for Patterned Films北大核心CSCD

Based on the equivalent elasticity theory for layered materials, the micro-mechanics equivalent models for single and dual damascene structures were established. The equivalent elastic constant of the patterned structure was introduced, to establish the propagation model for the surface acoustic waves propagating in the layered structure of the patterned film/ substrate, and the theoretical dispersion curves of the surface acoustic waves were calculated with Green’s function and the matrix method. The finite element method was used to calculate 24 numerical examples of damascene structures with different volume ratios, and the results were compared with those of the strain energy method. The results show that, the average relative errors of the equivalent Young’s moduli of the 300 nm-thick dual damascene film and the 100 nm-thick single damascene film are 2.06% and 2.27%, respectively. The research verifies the correctness of the equivalent patterned structure model and the feasibility of the surface acoustic wave method to characterize the mechanical properties of patterned films, and provides a reference for the development of suitable chemico-mechanical polishing technologies for patterned films under low pressure. © 2023 Editorial Office of Applied Mathematics and Mechanics. All rights reserved.     

有限元/边界元耦合方法在海洋生物目标强度特性研究的应用*

目标强度特性是海洋生物声学识别与资源量评估的重要依据,其中,基于近似几何体和声阻抗特性的理论模型法是研究海洋生物目标强度的重要手段。由于对几何形态近似处理以及数值求解方法的限制,传统理论模型对声波频率、入射方位以及目标声阻抗、形态尺寸等均有各自不同的适用范围,单一模型难以满足不同种类或同一种类但不同尺寸海洋生物的目标强度求解。本文尝试将逐渐见诸应用的有限元/边界元耦合方法用于海洋生物目标强度特性研究,分别以球形生物、纺锤形鱼类尾明角灯鱼(Ceratoscopelus warmingii)和细长形浮游动物南极大磷虾(Euphausia superba)为例进行仿真计算,并与相适应的经典理论模型进行对比分析。结果表明,对于球形生物,有限元/边界元耦合方法与解析模型的目标强度频响曲线完全吻合;对于纺锤形鱼类,有限元/边界元耦合方法可有效弥补基于模态级数解的形变圆柱体模型在中低频和两端入射时的准确性问题;对于细长形浮游动物,有限元/边界元耦合方法与畸变波玻恩近似模型高度吻合。综上,有限元/边界元耦合方法对多种海洋生物目标强度求解均具有较好的适用性,未来有待进一步结合实验测定进行验证。     

基于深度学习的材料超声回波衰减预测方法

材料超声回波衰减是评价材料均匀一致性的常用方法, 针对具有复杂结构的航空发动机盘件难以进行材料底面超声回波衰减评价的问题, 本文提出了利用超声背散射波信号直接预测底面回波衰减的方法。采用10MHz聚焦探头进行超声背散射波数据的采集, 利用深度学习技术构建和训练模型,建立了基于深度学习的材料底面回波衰减预测方法, 同时讨论了采用不同信号形式的超声波信号分类识别模型的准确率差异。研究发现：基于深度学习技术可实现通过超声背散射波预测材料的底面回波衰减, 预测结果和实际底面回波衰减试验结果具有良好的一致性。     

超声辅助电镀的仿真与实验*

为了提高镀层的表面质量,提出了一种超声辅助电镀的方法。超声的空化与搅拌作用可以影响电镀的电沉积过程。设计了合理的换能器结构,并搭建了超声辅助电镀装置。通过对模型进行压电声学场与电镀场耦合仿真分析,结果表明：在硫酸铜电解液,镀铜时间60s,电压300V条件下,进行超声辅助电镀,镀层厚度分布均匀,镀层中部电流密度分布均匀,边缘最大电流密度是未加超声的2倍左右 。基于仿真结果,进行相同的实验测试,结果表明：超声辅助电镀可以提高镀层的均匀性,减少铜颗粒表面的杂质,提高表面的光洁度。阴极样品距离换能器头部位置在60mm左右,镀层质量良好。     

Effect of acoustic disturbances on a free convective flow

A gas-dynamic flow in an axisymmetric convective jet is studied experimentally. It is demonstrated that the jet flow with Grashof numbers Gr = (0.4–2.0) · 10⁶ is self-similar. Acoustic oscillations directed perpendicular to the axis of symmetry transform the profiles of the gas-flow parameters; two temperature maximums located outside the axis can appear. The results obtained indicate that flow instability is generated in high-gradient regions. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 47, No. 5, pp. 27–33, September–October, 2006.     

Noise Reduction in Non-Premixed Lifted-Jet Flames

The characteristic changes in non-premixed lifted flames when excited by hole tones from a cavity, placed in the flow path of the fuel gas, were studied. A significant reduction of the sound pressure level was observed in the low-frequency noise at the flame base of the lifted flame when the hole tones were induced in the jet. The liftoff height and the mean diameter of the flame base decreased for a given jet Reynolds number. The blow-off velocities also increased suggesting improved flame stability in the presence of the hole tones induced by the cavity. Incorporation of the cavity upstream of a burner nozzle is demonstrated to give a quieter lifted flame with improved stability characteristics. This revised version was published online in July 2006 with corrections to the Cover Date.